BUS | FIELDBUS cables for industrial & process automation
PROFIBUS DP / FMS / FIP 150 Ohm
03.10.01.01
|
Use of Cable
as fieldbus cable for PROFIBUS (Process Field BUS) systems, for fixed installation & limited flexible applications.
These cables are suitable for PROFIBUS DP (Decentralized Peripherals) and PROFIBUS FMS (Fieldbus Message Specification) and also for FIP (Factory Instrumentation Protocol) applications.
Standard acc. to Profibus-Spec.: EN61158 & EN61784 (DIN19245 T3 & EN50170)
Product information "PROFIBUS DP / FMS / FIP 150 Ohm"
Special features
- largely resistant to grease, coolant fluids and lubricants
- oil-resistant: PUR & PVC acc.to DIN EN 60811-2-1 (PVC only mineral oil)
Marine MUD acc.to NEK 606 (drilling mud) - UV-resistant: PUR; FEP; PVC & PE black; CMG & CMX types
- optimized EMC compliant shielding
- max. cable lengths for a bus segment acc.to PI at stated transmission rate:
PROFIBUS DP: 93,75kbit/s-max.1,2km | 187,5kbit/s-max.1km | 0,5Mbit/s-max.400m
1,5 Mbit/s-max.200m | 12,0 Mbit/s-max.100m
FIP : 2,5 Mbit/s-max. 200m
- conform to RoHS // conform to DESINA (violet)
- LABS-/silicone-free (during production)
- conform to 2014/35/EU-Guideline ("Low-Voltage Directive") CE
- FRNC: Flame Retardant Non Corrosive, halogen free
- FC-Type = 'fast-connect' construction // PI = Profibus & Profinet International
| Conductor material: | Bare copper wire resp. bare copper strand |
|---|---|
| Conductor class: | Ø 0,64 mm: solid; Ø 0,64L & 0,34 mm²: 7-wired; 1,0 mm²: fine wired acc. to IEC 60228 cl. 5 |
| Core insulation: | BUS: foamed Polyolefin resp. foamed FEP; supply cores: Polyolefin |
| Core identification: | BUS: gn, rd; supply cores: bk, bu, gnye |
| Stranding: | BUScores stranded to a pair |
| Shield: | Alu-lamin. polyester foil, metal side outside, cover. 100% under copper braid tinned |
| Overall stranding: | HYBRID: screened BUSelem. a. supply cores stranded |
| Outer sheath: | PVC, PE, FEP, PUR, XP, HP, halogen-free compound |
| Sheath colour: | Violet RAL4001(VT), blue RAL5015(BU) or black(BK) |
| Rated voltage: | BUScores: 250 V (not for high voltage purposes); supply cores: 500 V |
| Loop resistance: | Max. 110,0 Ω/km - 0,64 mm; max. 175,2 Ω/km - 0,64L; max. 39,0 Ω/km - 1,0 mm² |
| Capacity: | Nom. 30 nF/km |
| Characteristic impedance: | 150 +/- 15 Ω |
| Min. bending radius fixed: | 7,5 x d |
| Min. bending radius moved: | 15 x d |
| Operat. temp. fixed min/max: | FRNC, XP: -25 °C/+80 °C | PE: -40 °C/+70 °C | PVC, PUR, HP:-40 °C/+80°C | PVCExt.:-40 °C/+105°C | FEPExt.: -50 °C/+180 °C |
| Operat. temp. moved min/max: | -10 °C/+70 °C; PUR, FEP: -30 °C/+80 °C |
| Halogen free: | Acc. to IEC 60754-1 (FRNC types) |
| Burning behavior: | PE: not flame retardant | PVC+Marine C-XP: acc. to IEC 60332-1-2 | AWM: acc. to IEC 60332-1-2, cable flame test (UL 2556) | CMX: acc. to IEC 60332-1-2, FT1, VW-1 | CMG: acc. to IEC 60332-3-24(Cat.C), FT4 | CM: acc. to IEC 60332-3-24(Cat.C), UL FlameExposure (UL 1685/CSA) | Marine C-HP: acc. to IEC 60332-3-22(Cat.A/F) |
| Approvals: | See table right side |
There aren't any asked questions yet.
ASi-BUS Aktor Sensor Interface
03.10.06.01
BUS | FIELDBUS cables for industrial & process automation
for fixed installation & limited flexible applications, UL/CSA
for fixed installation & limited flexible applications, UL/CSA
Item count
10
PROFIBUS DP / FMS / FIP 150 Ohm - HF
03.10.01.02
BUS | FIELDBUS cables for industrial & process automation
for high flexible applications (drag chain, robotic & festoon) UL/CSA
for high flexible applications (drag chain, robotic & festoon) UL/CSA
Item count
12