PROFIBUS DP / FMS / FIP 150 Ohm - HF | 2003657 | 2003657
BUS | FIELDBUS cables for industrial & process automation

PROFIBUS DP / FMS / FIP 150 Ohm - HF

03.10.01.02

|

Use of Cable

as fieldbus cable for PROFIBUS (Process Field BUS) systems, for high flexible applications (e.g. power chains, gantry robots, pick&place units, conveyors, machine tools, automated production systems, etc.)

These cables are suitable for PROFIBUS DP (Decentralized Peripherals) and PROFIBUS FMS (Fieldbus Message Specification) and also for FIP (Factory Instrumentation Protocol) applications.
Standard acc. to Profibus-Spec.: EN61158 & EN61784 (DIN19245 T3 & EN50170)

Product variants
Product information "PROFIBUS DP / FMS / FIP 150 Ohm - HF"
Special features
  • low adhesion
  • largely resistant to grease, coolant fluids and lubricants
  • oil-resistant: PUR & PVC acc.to DIN EN 60811-2-1 (PVC only mineral oil)
  • UV-resistant
  • optimized EMC compliant shielding
  • max. cable lengths for a bus segment acc.to PI at stated transmission rate:
      PROFIBUS DP: 93,75kbit/s-max.1,2km | 187,5kbit/s-max.1km | 0,5Mbit/s-max.400m
                                 1,5 Mbit/s-max.200m | 12,0 Mbit/s-max.100m
      FIP                   : 2,5 Mbit/s-max. 200m

 

Remarks
  • conform to RoHS // conform to DESINA (violet)
  • LABS-/silicone-free (during production)
  • conform to 2014/35/EU-Guideline ("Low-Voltage Directive") CE
  • FRNC: Flame Retardant Non Corrosive, halogen free
  • FC-Type = 'fast-connect' construction // PI = Profibus & Profinet International
speed: self-supporting: 4 m/s
shield: alu-lam. polyester foil, metal side outside, coverage 100% under copper braid tinned
torsion: TORSION: ± 180°/m
Features: halogen-free
capacity: nom. 30 nF/km
Shielding: shielded
approvals: see table right side
stranding: BUScores stranded to a pair
Point of use: outdoor
Use of cable: festoon
acceleration: max. 5 m/s² | TORSION: max. 10 m/s²
halogen free: acc. to IEC 60754-1 (FRNC types)
outer sheath: PVC resp. PUR
rated voltage: BUScores: 250 V (not for high voltage purposes); supply cores: 500 V
bending cycles: undefined-38987
conductor class: Ø 0,64L & 0,34 mm²: 19-wired; 1,0 mm²: fine wired acc. to IEC 60228 cl. 6
core insulation: BUS: foamed PE/PP; supply cores: Polyolefin
loop resistance: max. 133,0 Ω/km-0,64L & 0,8L, max. 39,0 Ω/km-1 mm², max. 26,6 Ω/km-1,5 mm²
traverse length: max. 10 m (TL)
burning behavior: PVC CMG: acc. IEC 60332-3-24(Cat.C), FT 4 | PUR: acc. IEC 60332-1-2 | PUR CMX: acc. IEC 60332-1-2, VW-1
Rated voltage IEC: 250 V
overall stranding: HYBRID: screened BUSelem. a. supply cores stranded
conductor material: bare copper strand
core identification: BUS: gn, rd; supply cores: bk, bu, gnye (1,0mm²) | bk with numerals (1,5mm²)
Rated voltage UL/CSA: 600 V
Approvals / Standards: UL
characteristic impedance: 150 +/- 15 Ω
min. bending radius fixed: 5 x d
min. bending radius moved: 7,5 x d < 3mTL* | 15 x d ≥ 3mTL*, FESTOON: 10 x d
outer sheath construction: violet RAL 4001 (VT) or petrol (PT)
operat. temp. fixed min/max: -40 °C / +80 °C
operat. temp. moved min/max: PVC: -10 °C / +70 °C; PUR: -30 °C/ +70 °C

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
ASi-BUS Aktor Sensor Interface 03.10.06.01
BUS | FIELDBUS cables for industrial & process automation
for fixed installation & limited flexible applications, UL/CSA
Item count 10
PROFIBUS DP / FMS / FIP 150 Ohm - HF 03.10.01.02
BUS | FIELDBUS cables for industrial & process automation
for high flexible applications (drag chain, robotic & festoon) UL/CSA
Item count 12